Marble-effect cladding on the wall and bath surround — LOFTBAU

Large-format Tiles

How many bathroom tiles should you order? Area, allowance and cutting plans

2 November 2026 · 7 min read · Paweł Szalecki, LOFTBAU

Marble-effect cladding on the wall and bath surround — LOFTBAU

Tile quantities depend on the surfaces being covered, the cutting layout and full-pack quantities. Floor area alone does not describe a fully tiled bathroom.

Calculate surfaces, layout and packs

Bathroom tile quantities depend on the area being covered, the cutting layout and the number of full packs. Floor area alone is insufficient when tiles also cover walls, a bath enclosure and niches.

Measure the surfaces first, draw the layout next and then establish an allowance. With large slabs, count the whole pieces needed for particular elements. Even a sizeable offcut may be unsuitable for another part of the room.

1. Measure each surface separately

Record the floor dimensions, the width of each wall and the intended tiling height. Include enclosure faces and sides, shelves, niches and reveals where they will receive tiles. Separate the quantities by collection and colour.

Do not automatically subtract a bath or cabinet footprint. Whether tiles continue behind or underneath them depends on the agreed construction. Mark the actual tiled surfaces on the drawing. This is more useful than a general description such as 'a 5 m² bathroom'.

2. Worked example: 5 m² of floor is not 5 m² of tiles

Assume a rectangular room measuring 2.0 × 2.5 m, all walls tiled to 2.6 m and a door opening of 0.8 × 2.0 m. This is an arithmetic example without niches, windows or enclosures.

The floor is 2.0 × 2.5 = 5.0 m². The wall perimeter is 2 × (2.0 + 2.5) = 9.0 m. Wall area before deducting the door is 9.0 × 2.6 = 23.4 m². Subtracting the 1.6 m² doorway leaves 21.8 m². Adding the floor gives 26.8 m² before the cutting plan and allowance.

Adjust the scope and add relevant enclosure surfaces for the real bathroom. If walls and floors use different products, keep separate totals. Surplus tiles in one colour cannot make up a shortfall in another collection.

Premium bathroom pricing — Kraków

Labour from PLN 12,500 net · Free consultation

See pricing →

3. A percentage allowance is a preliminary estimate

The allowance depends on the laying pattern, room geometry and planned cuts. The Ceramika Paradyż calculator includes laying pattern and a planned allowance, with joint width available in advanced options. It helps estimate a purchase but does not replace drawings of the details.

Do not treat one percentage as a guarantee for every project. Some offcuts from a simple surface can be reused elsewhere. Numerous niches, corners or a directional pattern may reduce those opportunities. Agree the final order with the installer using the layout.

4. Count complete slabs for large formats

A nominal 120 × 280 cm slab covers 3.36 m². If you need a 100 × 260 cm element, the remaining strips do not create another element of that size, even though they still have a measurable area. An area balance and a cutting plan answer different questions.

The cutting plan should show which slab supplies each large element and where remaining pieces can be reused. Account for pattern direction and edge finishing. Do not assume every offcut will work as a shelf or enclosure side.

For veined slabs, check whether the design requires continuity across adjacent faces. Matching a particular pattern can require more material than a layout without pattern matching. Decide before ordering.

5. Round up to full packs

Once the quantity is established, check the pack contents for the exact product. For example, if you need 22.4 m² and a pack contains 1.44 m², the quotient is approximately 15.56. Sixteen complete packs provide 23.04 m².

This is an arithmetic illustration, not a specification for a particular tile. Read the actual pack data from the selected product. Check the number of pieces against the cutting plan too: area gained by rounding up does not necessarily provide every required shape.

6. Agree a reserve and inspect the delivery

Separate the material allowed for cutting from any reserve retained for a future repair. Agree the reserve for the particular tile and available storage. Do not add it twice if it is already part of the order.

On delivery, compare the product, quantity and pack markings with the order. Check visible damage and the specified finish. Keep labels and proof of purchase. Resolve uncertainties with the supplier before installation.

Establish the return conditions for unused packs before buying. Do not assume every supplier accepts every product back, especially material ordered specifically for a project.

7. What the installer needs to check quantities

Provide a measured floor plan, wall elevations, tiling heights, exact tile references and pack details. Mark niches, the bath enclosure, WC boxing and any corner where the pattern should continue.

For large-format tile installation in Kraków, discuss the cutting plan before placing the order. If you are still choosing tiles, compare formats using the wall elevations and floor layout. Send the plan and product list using the contact details on the LOFTBAU website.

Supporting source

Ceramika Paradyż's tile calculator explains the role of laying pattern, allowance and joint width in estimating quantities: https://www.paradyz.com/pl/kalkulator-plytek. The worked calculations and cutting-plan discussion here are editorial examples.

bathroom tile quantitiestile allowanceslab cutting plan

Frequently asked questions

Area is the starting point. Check the layout, cuts, details and complete packs before buying. For large slabs, the number of complete pieces matters too.

No. Simple surfaces, niches, corners and pattern matching can produce different cutting losses. Base the allowance on the particular cutting plan.

Deduct the opening if it will not be tiled. Include any tiled reveals separately. The cutting layout determines the final tile count.

Not necessarily. A piece needs suitable dimensions, pattern direction and edges. Adding up the area of offcuts does not show that they can replace a complete slab.

Contact

Describe your project —
we respond within 24 h.

Premium bathroom executions with attention to every technical and aesthetic detail.

Phone / WhatsApp

+48 501 633 917

Service area

Kraków and surroundings